Secure Order Placement

Standard Test Blocks   
Product Detail Information

Home » Phased Array Test Blocks - See Our New Expanded Line of Phased Array Test Blocks! » PA Calibration Block No. 3 - 3/4" Thick

 Checkout
Product ID: PACB3.ICS
Phased Array Cal Block No. 3 - ¾" Thick, 1018 Steel
Phased Array Cal Block No. 3 - ¾" Thick, 1018 Steel
Previous 1 of 2 Next
This Phased Array Calibration Block designed by Paul Holloway of Holloway NDT & Engineering contains all of the required features of the ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.

This block is designed to reduce echo interference when performing a DAC/TCG calibration.   The 1/2T hole is isolated from all other reflectors, while the 1/4T hole doubles as the 3/4T with the block inverted.  A 150° angle has also been machined into the block ends to diminish corner reflections.   As a result, the 1/2T hole signal is free of other reflection sources to sound path distances exceeding 6 inches.
  • Dimensions:  .750" thick x 1.50" wide x 16.00" long
  • Alloy:  1018 Steel, Nickel-plated
  • Design by Paul Holloway of Holloway NDT
 
Email Friend
List Price: $1,045.00
Price: $1,045.00

Related products...

Product ID: PACB3.WC
Wood Case for Phased Array Cal Block No. 3 - ¾" Thick

List Price: $113.00
Price: $113.00
  

Login Status  Login Status

Not logged in

» Login